Precision Ball Ways Precision Ball Ways with Retainers - Precision Miniature Ball Ways Precision Ball Way Modules Precision Ball Splines

Precision Miniature Ball Ways Features
TSUBAKI Precision Miniature Ball Ways feature simple construction, Four Way directional loading capacity, recirculation units with unique proprietary ball retainer and a compact rail track which simplifies installation. Easy Accurate Installation Accurate mounting is achieved by engaging the rail track to the slot in the bed and tightening the bolts. Four Way Directional Rated Load Because the steel balls are recirculated between the track and the slide unit, and the contact on both track surfaces is at a 45o angle, the unit can be dynamically loaded in all directions.		Unique Ball Recirculation Unit Although the TSUBAKI Precision Miniature Ball Way is basically a simple structure, it features retainers to ensure that the steel balls are securely contained within the slide unit race-way, enabling easy reasembly onto the track even when the slide unit has been removed. Simple Construction A one-piece tubular recirculation unit has been adopted in preference to machining the recirculation hole for non-loaded steel balls. The recirculation unit also permits a more compact design and smoother action.
Designation TSUBAKI Precision Miniature Ball Ways are identified by specific code numbers. When placing your order, please specify the correct code by following the instructions below.
Accuracy Standards TSUBAKI Precision Miniature Ball Ways are classified into the following three categories according to dimensional tolerance. Dimensional tolerance (micro meters) Grade C1 Precision C3 High C5 Ordinary Item Height H Dimensional Tolerance Pair Variation ±10 5 ±20 20 ±40 40 Width N Dimensional Tolerance Pair Variation ±10 10 ±30 30 ±50 40 Parallelism (micro meters) Parallelism of plane C to datum plane A Parallelism of plane D to datum plane B Rail Track Length (mm) Grade Over Up to C1 Precision C3 High C5 Ordinary - 120 180 250 315 400 500 120 180 250 315 400 500 630 1.5 1.5 2 2.5 3.5 4.5 6 4 5 6 8 10 11 14 10 12 14 17 20 24 27		Manufacturing Range Below chart shows the max. length of tracks available for each model No. of TSUBAKI Precision Miniature Ball Way Maximum length of rail track (micro meters) Model No. Max. Length K 7 T R K 9 T R K 12 T R 500 500 500 Preload and Rigidity Suitable preloads for TSUBAKI Precision Miniature Ball Ways may be selected according to the application. In general, when preloading is applied, rigidity will be doubled from that of the non-preloaded condition. Below shown standard TSUBAKI preload values. Standard preload values (kgf) Model No. Grade of Preload Slight Preload T0 Light Preload T1 K 7 T R K 9 T R K 12 T R 0 0 0 5 5 10
© 2000 Tsubaki Nakashima Co., Ltd. All Rights Reserved.